Did you know that just one uncontrolled urinal with a typical 10 litre cistern fitted with an automatic syphonic flushing valve can waste over 500,000 litres of water per year.

With a properly set up Supreme Water Saver you can make savings of up to 80%. Apart from lessening the strain on the environment, if you are paying water rates the savings often pay for the controller within one year.

Now that’s a no brainer really!!!

Q. What power does a Supreme Water Saver require?

Supreme Water Savers employ the latest in electronics and solenoid valve technology. Most retro fit installations utilise a specially designed battery pack that typically give 2.5 - 3 years service, often longer. For new installations or where a 240 volt power supply is available, we can supply a mains power pack.

Q. How many single stall urinette type urinals can be serviced from one water saver?

We recommend that three urinettes or 1.8m of slab urinal be serviced from one controller.

Q. Can we run more that one solenoid valve from a single sensor?

Yes, you can run two solenoids from one sensor, with all models prior to August 2005. Our latest models have been reconfigured to allow up to three solenoid installations. It is highly recommended that multiple solenoid installations be mains powered via our optional power pack.

Q. Can supreme water savers be used for cistern and direct fee urinals?

Yes the supreme water savers can be configured for all urinal types plus they have some additional features for direct feed urinals.

Q. We have a situation where a large number of people use the washroom all at one time, how can we best control water usage?

The supreme water saver has a handy ‘delay before flush’ option allowing you to set the flush cycle timing to suit your site usage.